Basket Centrifuges

One of the simplest types of centrifuge widely used in the industry. The solid material is scooped out Basket from the top of the centrifuge.

Advantages :

• Manual removal of solids results in total protection of crystal structure.
• Extremely simple operation.
• Very low solids loss in filtrate.
• Distinct separation between mother and crystal enable better product quality.

Available Features:

Suspension / Mounting :

• Standard 3 Pendulum Suspension
• Inertia Plate and Anti Vibration Mounts ( 4 Point Mounting ).

Drive and Transmission :

• Mechanical clutch pulley
• Variable Frequency Drive (Inverter)
• Fluid Coupling
• Two Speed Motor
• Reverse Current Braking

Optional Features

• Fully Opening Outer Case for better accessibility for cleaning and maintenance
• Full Lid opening for better accessibility for cleaning and maintenance
• CGMP Construction
• Nitrogen Blanketing
• Vibration Monitoring
• Zero Speed Interlock with Speed Indicator
• Cleaning in Place

Standard Feature :

Leak Test as per Din 24 400 : Machine is tested at a pressure of 400 mbar and pressure drop is restricted to below 60 mbar / hr.

Available Sizes (Basket Dia) : 24’’ (610 mm) to 60” (1524 mm) (Special sizes can be designed)
Volume under Lip : 45 to 800 lit per batch.
Max Permissible Load* : 70 to 800 kg per batch.
Centrifugal Force : 400 to 2000 G units - depending on size of Basket
Speed of Basket : 600 to 2500 rpm- depending on size of Basket

Material of construction : Stainless Steel , Carbon Steel, Hastelloy, Rubber Lined , Fluoro Polymer Coating / Lining viz.- Halar (ECTFE), Teflon (PFA )

Lining/ Coating can be provided not only on the contact parts but also on the exterior body for prevention from spillage and corrosive atmosphere.

* The load indicated is based on mechanical design. However output per batch depends on various other factors and may be lower than permissible load.